Tips on how to use a sewing machine to make it better

For just using the machine near the novice always handled badly use its methods and know-how, following the sewing machine business in the Czech Republic to teach you some tips to make the machine more easy to use, of course, these tricks for veterans are very Applicable Oh!

    Machine does not take the needle tips: using the sewing machine may encounter a situation you do not take the needle sewing machine, in which case you do not worry, you can try to replace the empty spool and re-recognize the needle; Lower the presser foot; shuttle bobbin pressure in the end and left homing; lowering the buttonhole lever to solve, in fact, do not take the sewing machine needle is small, probably because it runs out of noodles, or the presser foot is not down; shuttle spool is not positioned correctly and some other cases.

    Upper thread breakage during use: the case of upper thread breakage may occur in the course of our sutures, so that the face of this situation you can try again on the line, to see if there is no tie and eliminate, or adjust the gripper pressure, substituting the appropriate machine needles, or adjust the starting speed.

    Sewing occur Jumper; jumper is actually a relatively common condition, you can try adjusting the thread tension, substituting the appropriate machine needles, or to increase the presser foot pressure to resolve. Because the cause of the occurrence of the jumper is relatively simple, and may be caused too much tension, needle size designation is not right, or the presser foot pressure is not enough and so on.

    Sewing needle occurs: Solving The trick is to reinstall the machine needle, needle exchange right, the choice of suitable presser foot; reinstall the presser foot and the like.

    Sewing fabrics wrinkle situation occurs: it is possible to fight wrinkles occur because of incorrect thread tension or pressure enough leg muscles Road, tip passivation, etc., to solve the trick is to replace the needle; adjusting thread tension; increase the presser foot pressure, discharge Small pins and the like.